You have no items in your shopping cart.
This cable assembly consists of a RAMLATCH® RAMX026 line mount connector terminated to one end of a cable with a 6ft-6 Inch Fan-out on the opposite end. As with all RAMTECH® Part numbers the first sequence indicates the overall assembly, the second the RAMLATCH® connector configuration, the third the length and the last sequence indicates the color of the connector.
Note the manufacture of this cable is extremely Labor intensive. As with all Ramtech products it is completely hand assembled in the U.S.A. by assemblers that have been assembling Ramtech products for years.
The XLR fan-out is constructed by first sliding Tech Flex™ over each individually jacketed lead. This Tech Flex™ is the highest quality available and is both heat and chemical resistant. This grade is indicated by a white thread interwoven throughout the braiding.
The Tech Flex™ on each lead is then heat shrunk to the jacketed pair at the “breakout point” (point where the overall jacket ends) and at the connector (XLR) end with a channel marker.
The Breakout point is then bound with the Proprietary Ramtech Hangman’s Noose. We take electrical friction tape and spin it with a drill to make a gummy string. This gummy string is wound tightly around the breakout point of the cable for approximately 4”” onto the cable jacket and 4” out on to the Tech Flex™ leads. Then the entire area is double heat shrunk with heavy duty shrink. On the XLR end the channel markers are heat shrunk with crystal clear shrink to preserve them indefinitely.
These cables have a very long use life when made this way. We know of many cables that have been on tours for 20 years or more that have been built using this method and still work and perform today.
Note the manufacture of this cable is extremely Labor intensive. As with all Ramtech products it is completely hand assembled in the U.S.A. by assemblers that have been assembling Ramtech products for years.
The XLR fan-out is constructed by first sliding Tech Flex™ over each individually jacketed lead. This Tech Flex™ is the highest quality available and is both heat and chemical resistant. This grade is indicated by a white thread interwoven throughout the braiding.
The Tech Flex™ on each lead is then heat shrunk to the jacketed pair at the “breakout point” (point where the overall jacket ends) and at the connector (XLR) end with a channel marker.
The Breakout point is then bound with the Proprietary Ramtech Hangman’s Noose. We take electrical friction tape and spin it with a drill to make a gummy string. This gummy string is wound tightly around the breakout point of the cable for approximately 4”” onto the cable jacket and 4” out on to the Tech Flex™ leads. Then the entire area is double heat shrunk with heavy duty shrink. On the XLR end the channel markers are heat shrunk with crystal clear shrink to preserve them indefinitely.
These cables have a very long use life when made this way. We know of many cables that have been on tours for 20 years or more that have been built using this method and still work and perform today.