PHT-408
6" x 7.5" Plastic Horn Tweeter
Used in PAS, EV and many more.

Specs:
Diaphragm Diameter: 1.0 inch (25.4mm)
Nominal Impedance: 8 Ohm
Voice Coil DC Resistance: 7.2 Ohm
Power Handling: 30 Watt
Sound Pressure Level (1W@1M): 105 dB
Magnet: Ferrite
Diaphragm Material: Phenolic Resin
Horn Material: A.B.S With Glass Filled Black Polycarbonate
Nominal Coverage Angle (H x V) -6 dB: 90° x 40°
Freq. Response: 2000-16,000 Hz
Cutoff frequency: 2 kHz
Net Weight: .93kg (2.04 lbs)

Dimensions:
Outside: 6.14" x 7.72" (112mm x 269mm)
Cutout: 4.72" x 6.3" (120mm x 160mm)
Mounting Depth: 5" (126.9mm)

The PHT-408 is a rectangular format high output integrated horn and
driver. The system features a high sensitivity rating of 105dB at one
watt and one meter. This makes the PHT-408 ideal for portable sound
reinforcement system applications. The PHT-408 has been used very
successfully in two way designs where the low frequency loudspeaker
is a 12 inch or 15 inch professional quality transducer. The integrated
horn and driver is used in many professional two way designs.
The rated bandwidth of 2kHz to beyond 16kHz make this system ideal
for two way system designs. The PHT-408 is ideal as a high frequency
device for portable high performance sound reinforcement systems.
The P Audio PHT-408 uses a small format diaphragm assembly that is
optimized for wide band piston range response. This diaphragm format
makes the compression driver perform well at extremely high frequencies.
The rated coverage pattern offers included angles of 90 degree in the
horizontal plane and 40 degree in the vertical plane. This dispersion
pattern is ideal for wide coverage applications such as night clubs, pubs,
and restaurant applications.