Dynaudio 11" Refoam Kit
This kit will fit some Dynaudio 11" speaker models that have an angled attachment to cone.
Models include 30W100 and more.
Check for correct dimensions..

Each Refoam Kit includes all the materials needed to repair two (2) woofers:
- Refoaming Instructions
- 2 Foam Surrounds
- Shims For Centering the Voice Coils
- 1 Bottle of Specially Formulated Foam Surround Adhesive (strong and sticky to bond on the poly cones)

*It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. However some Dynaudio woofers (like the 30W100) we recommend not removing the dust cap or shimming the voice coil. The cap is hard to remove and you could damage the voice coil.

A - Outside diameter of the surround = 10.125"
B - Roll ends = 9.75"
C - Roll starts / O.D. of the cone = 8.25"
D - Inside diameter of the surround = 7.875"