Boston 10" VR500 and PV600 Subwoofer Refoam Kit
This kit will fit many Boston 10" speaker models that have an angled attachment to cone.
Check for correct dimensions..
These are very unique surrounds because the angled part that attaches to the cone is straight. See close up of the picture to see.

Model #'s include VR500, PV600 and many more.

Each Refoam Kit includes all the materials needed to repair one (1) woofer:
- Refoaming Instructions
- 1 Foam Surround
- 1 Bottle of Specially Formulated Foam Surround Adhesive.

*It can be difficult to remove the dust cap on this woofer. If you remove the poly cap it could destroy the paper cone. Therefore, we recommend hand centering this woofer instead of shimming the voice coil when replacing the foam surround. When the glue is still tacky you can move the cone up and down. If you feel or hear the voice coil rubbing, just keep moving the cone assembly until it is free of rubbing.

A - Outside diameter of the surround = 9.5"
B - Roll ends = 9"
C - Roll starts / O.D. of the cone = 7.5"
D - Inside diameter of the surround = 7"